beautypg.com

Lights, Headlamp control, Autolamp control (if equipped) – FORD 2012 Flex v.1 User Manual

Page 80: Autolamps - programmable exit delay, Headlamps

background image

HEADLAMP CONTROL

Turns the lamps off.

Turns on the parking lamps,

instrument panel lamps, license
plate lamps and tail lamps.

Turns the low beam headlamps

on.

Autolamp control (if equipped)

The autolamp system provides light
sensitive automatic on/off control of
the exterior lights normally
controlled by the headlamp control.
• To turn autolamps on, rotate the

control clockwise to

.

• To turn autolamps off, rotate the

control counterclockwise to

.

The autolamp system also keeps the
lights on for a predetermined
amount of time after the ignition switch is turned to off. You can change
the amount of time the lamps stay on by using the programming
procedure that follows:

Note: If the vehicle is equipped with autolamps it will have the
headlamps on with windshield wipers feature. If the windshield wipers
are turned on for a brief period of time, the exterior lamps will turn on
with the headlamp control in the Autolamp position.

Autolamps - programmable exit delay

Programmable exit delay allows the length of the autolamp exit delay to
be changed.

To program the auto lamp exit time delay:

1. Start with the ignition off and the headlamp control in the autolamp
position.

2. Turn the headlamp control to off.

Lights

80

2012 Flex (471)
Owners Guide, 1st Printing
USA
(fus)