beautypg.com

Erasing homelink buttons, Reprogramming a single homelink button, Driver controls – FORD 2012 Flex v.1 User Manual

Page 111

background image

Erasing HomeLink

buttons

To erase the three programmed
buttons (individual buttons cannot
be erased):
• Press and hold the two outer

HomeLink

௡ buttons until the

indicator light begins to
flash-after 20 seconds. Release
both buttons. Do not hold for
longer that 30 seconds.

HomeLink

௡ is now in the train (or learning) mode and can be

programmed at any time beginning with Step 1 in the Programming
section.

Reprogramming a single HomeLink

button

To program a device to HomeLink

௡ using a HomeLink௡ button previously

trained, follow these steps:

1. Press and hold the desired HomeLink

௡ button. Do NOT release the

button.

2. The indicator light will begin to flash after 20 seconds. Without
releasing the HomeLink

௡ button, follow Step 1 in the Programming

section.

For questions or comments, contact HomeLink

௡ at www.homelink.com

or 1–800–355–3515.

Driver Controls

111

2012 Flex (471)
Owners Guide, 1st Printing
USA
(fus)