FORD 2013 Fiesta v.2 - Manual (Page 100)

Message Warning Lamp at
Instrument Cluster
System
ENGINE OIL
PRESSURE LOW
STOP SAFELY
Engine Oil
BRAKE FLUID
LEVEL LOW
SERVICE NOW
BRAKE or Brakes
CHECK FUEL FILL
INLET
— Fuel
Oil life monitoring system reset
To reset the oil service light and clear the oil change message after
servicing use the following procedure:
1. Begin with the ignition off.
2. For keyed vehicles, turn the key to the II (on) position.
For push button start vehicles, press the Start/Stop button once
quickly without pressing brake pedal. DO NOT attempt to start the
engine.
3. Press the accelerator and brake pedals fully for 20 seconds.
4. ENGINE OIL CHANGE DUE NEXT SERVICE and will display.
5. Turn the vehicle off. The message and lights will be cleared.
Information Displays 99
2013 Fiesta (fie)
Owners Guide gf, 2nd Printing
USA (fus)