Stability control 229 – FORD 2013 F-550 v.3 User Manual
Page 230
AdvanceTrac® with RSC® Features
(Single rear wheels only)
Button functions
Stability
control
light
RSC®
ESC
TCS
Default at start-up
Illuminated
during bulb
check
Enabled
Enabled
Enabled
Button pressed
momentarily
Illuminated
solid
Enabled
Enabled
1
Disabled
Button pressed and
held for more than
5 seconds at vehicle
speed under 35 mph
(56 km/h)
Flashes then
illuminated
solid
2
Disabled
Disabled
Disabled
Vehicle speed
exceeds 35 mph
(56 km/h) after
button is pressed
and held for more
than 5 seconds
Illuminated
solid
Enabled
Enabled
1
Disabled
Button pressed again
after deactivation
Not
illuminated
Enabled
Enabled
Enabled
Transfer case
switched to 4WD
Low
3
Illuminated
Disabled
Disabled
Disabled
1
Electronic stability control has reduced sensitivity compared to fully
active system.
2
Lamp light starts blinking for four seconds after entering the press and
hold state.
3
Engaging 4WD Low locked automatically disables roll stability control,
electronic stability control and the traction control system.
Stability Control
229
2013 F-250/350/450/550 (f23)
Owners Guide gf, 3rd Printing, December 2012
USA (fus)