FORD 2013 Expedition v.3 - Manual (Page 244)

Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator pedal.
The indicator will turn on in the instrument cluster.
Changing the Set Speed
• Press and hold SET+ or SET–. Release the button when you reach
the desired speed.
• Press and release SET+ or SET–. The set speed will change in
approximately 1 mph (2 km/h) increments.
• Press the accelerator pedal or brake pedal until you reach the desired
speed. Press and release SET+.
Canceling a Set Speed
Tap the brake pedal. The set speed will not be erased.
Resuming a Set Speed
Press and release RES.
Switching Off Cruise Control
Note: The set speed is erased when you turn off cruise control.
Press OFF or turn off the ignition.
Cruise Control 243
2013 Expedition (exd)
Owners Guide gf, 3rd Printing, April 2013
USA (fus)