FORD 2013 Expedition v.2 - Manual (Page 134)

Wireless Headphones
This unit includes a built-in dual channel infrared transmitter for use
with your wireless headphones. You can change the volume with the
controls on each headset. You must use the wireless headphones within a
line of sight from the transmitter. Infrared transmission, like visible light,
travels only in a straight line.
Wired Headphones
You can use the 1/8–inch (3.5 millimeter) headphone jack on the device
with any standard stereo headphone. Remove and save the protective
plastic cover to access the jacks. Remember to replace the cover when
the jacks are not in use.
A/V Input
You can connect an external audio/video device to the unit, such as a
DVD player or video game device. Connect the RCA cables to the AV
INPUT RCA jacks according to color: yellow for video, red for right audio
and white for left audio. The external audio/video source overrides other
video sources for that monitor.
Wireless FM Transmitter
Your device may be equipped with an external FM transmitter. This
allows you to listen to the audio signal by tuning your vehicle’s FM radio
to the selected frequency and turning SOUND AROUND on with the
remote control. When you use SOUND AROUND, broadcast radio
reception may be poor. Performance varies based on geographic location.
Turning SOUND AROUND off allows normal radio reception.
How to use the FM Transmitter
1. Switch on the system and place a disc in Monitor A.
2. Point the remote control at the monitor, and then press DVD A.
3. Press SOUND AROUND ON/OFF to turn FM transmission off and
on.
4. Select a radio frequency (88.3, 88.7, 89.1, 89.5, 89.9, and 90.3MHz)
by pressing SOUND AROUND SELECT.
5. Select a frequency, and then tune your radio to the corresponding
frequency. Try each station frequency until you achieve a clear audio
signal.
Audio System 133
2013 Expedition (exd)
Owners Guide gf, 2nd Printing, October 2012
USA (fus)