Myford touch – FORD 2013 Escape v.4 User Manual
Page 335
Sound
(
Press the Settings icon >
Sound, then select from the
following:
Sound Settings
DSP
*
Bass
Occupancy Mode
*
Midrange
Speed Compensated Volume
Treble
Set Balance and Fade
*
Your vehicle may not have these sound settings.
Vehicle
(
Press the Settings icon >
Vehicle, then select from the
following:
•
Vehicle Health Report
•
Rear View Camera
•
Enable Valet Mode.
Vehicle Health Report
Turn Automatic Reminders on and off
and set the mileage interval at which you
would like to receive the reports. Press the
? for more information on these selections.
When done making your selections, press
Run Vehicle Health Report Now if you
want your report.
You can find more information on Vehicle
Health Report in this chapter. See
Information (page 363).
Rear View Camera
This menu allows you to access settings
for your rear view camera.
(
Press the Settings icon >
Vehicle > Rear View Camera,
then select from the following
settings:
•
Rear Camera Delay
•
Visual Park Aid Alert
•
Guidelines.
You can find more information on the rear
view camera system in another chapter.
See Rear View Camera (page 169).
Enable Valet Mode
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
(
1.
Press the Settings icon > Vehicle >
Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue the system locks
until you enter the PIN again.
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
331
Escape (TM2)
MyFord Touch™
(If Equipped)