beautypg.com

Maintenance, Specifications materials – FORD 2014 Transit Connect v.2 User Manual

Page 201

background image

Capacity

Item

0.8 qt (0.75 L)

Engine oil top-up - raise the level on the dipstick

from minimum to maximum

2, 3

4.2 qt (4 L)

Transmission

4, 5

15.9 gal (60 L)

Fuel tank

3.1 qt (2.9 L)

Windshield and rear window washer system -
including headlamp washer

1.5 lb (0.68 kg)

A/C Refrigerant

4.6 fl oz (136 ml)

A/C Refrigerant Compressor Oil

1

Add the coolant type originally used in your vehicle.

2

Your vehicle engine has been designed to use Motorcraft engine oils or equivalent oils

that meet Ford oil specifications. Motor oils of the recommended viscosity grade that
meet API SN requirements and display the API Certification Mark for gasoline engines
are also acceptable.

3

Do not use oil labeled with API SN service category unless the label also displays the API

certification mark. This oil does not meet the requirements of your vehicle engine and
emissions system.

4

Automatic transmissions that require Motorcraft MERCON LV transmission fluid should

only use Motorcraft MERCON LV transmission fluid. Use of any fluid other than the
recommended fluid may cause transmission damage.

5

Change the automatic transmission fluid and filter at the correct service interval. See

Scheduled Maintenance (page 375).

Specifications

Materials

Specification

Name

WSS-M2C945-A

Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil
XO-5W20-QSP

WSS-M2C200-D2

Motorcraft® Dual Clutch Transmission Fluid
XT-11-QDC

WSS-M97B44-D2

Motorcraft® Orange Antifreeze/Coolant Prediluted
VC-3DIL-B

WSS-M6C65-A2

Motorcraft® DOT 4 LV High Performance Motor Vehicle
Brake Fluid
PM-20

198

Tourneo Connect/Transit Connect (CHC) Canada/United States of America, enUSA, Edition date: 07/2013

Maintenance