FORD 2014 Transit Connect v.1 - Manual (Page 305)

• Speed Compensated Volume
• DSP. *
Note: * Your vehicle may not have these
sound settings.
Vehicle
E142607
To make adjustments using the
touchscreen, press:
1. Settings icon.
2. Vehicle.
Then select from the following:
• Active Park Assist
• Vehicle Health Report
• Rear View Camera
• Enable Valet Mode
• MyKey
• Traction Control
• Electronic Stability Control
• Hill Start Assist
Active Park Assist
When activated, your system displays
directions for you regarding the active park
assist process.
You can find more information on the
active park assist system in another
chapter. See Parking Aids (page 127).
Vehicle Health Report
Turn Automatic Reminders on and off
and set the mileage interval at which you
would like to receive the reports. Press the
? for more information on these selections.
When done making your selections, press
Run Vehicle Health Report Now if you
want your report.
You can find more information on Vehicle
Health Report in this chapter.
Rear View Camera
This menu allows you to access settings
for your rear view camera.
E142607
To make adjustments using the
touchscreen, press:
1. Settings icon.
2. Vehicle.
3. Rear View Camera.
Then select from the following:
• Rear Camera Delay
• Visual Park Aid Alert
• Guidelines.
You can find more information on the rear
view camera system in another chapter.
See Parking Aids (page 127).
Enable Valet Mode
Note: If the system locks, and you need to
reset the PIN, enter 3681 and the system
unlocks.
Valet mode allows you to lock the system.
No information is accessible until the
system is unlocked with the correct PIN.
E142607
To access, press:
1. Settings icon.
2. Vehicle.
3. Enable Valet Mode.
4. Continue
Note: After you press Continue the system
locks until you enter the PIN again.
Settings
Access and adjust system settings, voice
features, as well as phone, navigation and
wireless settings.
302
Tourneo Connect/Transit Connect (CHC) Canada/United States of America
MyFord Touch™
(If Equipped)