beautypg.com

262 wheels and tires – FORD 2014 Focus Electric User Manual

Page 263

background image

Note: After the sealing compound has been used, the maximum vehicle
speed is 50 mph (80 km/h) and the maximum driving distance is
120 miles (200 kilometers). The sealed tire should be inspected
immediately.

Note: After sealant use, the tire pressure monitoring system sensor and
valve stem on the wheel must be replaced by an authorized Ford dealer.

You can check the tire pressure anytime within the 120 miles
(200 kilometers) by performing the procedure from Second Stage:
Checking Tire Pressure
listed previously.

Removal of the sealant canister from the temporary mobility kit:

1. Unwrap the clear tube from the
compressor housing.

2. Locate the yellow cap at the end
of the clear tube.

3. Using the yellow cap tool, press
the tab located on the temporary
mobility kit compressor housing
while pulling up on the sealant
canister.

262

Wheels and Tires

2014 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing, May 2013
USA
(fus)