Safety belt height adjustment, Safety belt warning light and indicator chime, Conditions of operation – FORD 2014 Focus v.3 User Manual
Page 40: Safety belts 39
SAFETY BELT HEIGHT ADJUSTMENT
WARNING: Position the safety belt height adjusters so that the
belt rests across the middle of your shoulder. Failure to adjust
the safety belt properly could reduce the effectiveness of the safety belt
and increase the risk of injury in a crash.
Adjust the height of the shoulder belt so the belt rests across the middle
of your shoulder.
To adjust the shoulder belt height:
1. Squeeze the button and slide the
height adjuster up or down.
2. Release the button and pull down
on the height adjuster to make sure
it is locked in place.
SAFETY BELT WARNING LIGHT AND INDICATOR CHIME
This lamp illuminates and an audible warning will sound if the
driver’s safety belt has not been fastened when the vehicle’s
ignition is turned on.
Conditions of Operation
If...
Then...
The driver safety belt is not buckled
before the ignition switch is turned
to the on position...
The safety belt warning light
illuminates 1-2 minutes and the
warning chime sounds
4-8 seconds.
The driver safety belt is buckled
while the indicator light is
illuminated and the warning chime is
sounding...
The safety belt warning light
and warning chime turn off.
The driver safety belt is buckled
before the ignition switch is turned
to the on position...
The safety belt warning light
and indicator chime remain off.
Safety Belts
39
2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)