beautypg.com

Pairing your phone for the first time, Pairing subsequent phones, 400 myford touch® (if equipped) – FORD 2014 Focus v.2 User Manual

Page 401

background image

Pairing Your Phone for the First Time

WARNING: Driving while distracted can result in loss of vehicle
control, crash and injury. We strongly recommend that you use

extreme caution when using any device that may take your focus off
the road. Your primary responsibility is the safe operation of your
vehicle. We recommend against the use of any hand-held device while
driving and encourage the use of voice-operated systems when possible.
Make sure you are aware of all applicable local laws that may affect the
use of electronic devices while driving.

The first thing you must do to use the phone features of SYNC is to pair
your Bluetooth-enabled cellular phone with SYNC. This allows you to use
your phone in a hands-free manner.

Note: Put the transmission in position P. Turn on your vehicle ignition
and the radio.
1. Touch Add Phone in the upper left corner of the touchscreen. Find

SYNC appears on the screen and instructs you to begin the pairing
process from your device.

2. Make sure that Bluetooth is set to On and that your cellular phone is

in the proper mode. See your phone’s manual if necessary.

• Select SYNC, and a six-digit PIN appears on your device.

3. If you are prompted to enter a PIN on your device, it does not

support Secure Simple Pairing. To pair, enter the PIN displayed on
the touchscreen. Skip the next step.

4. When prompted on your phone’s display, confirm that the PIN

provided by SYNC matches the PIN displayed on your cellular phone.

5. The display indicates when the pairing is successful.

SYNC may prompt you with more phone options. For more information on
your phone’s capability, see your phone’s manual and visit the website.

Pairing Subsequent Phones

Note: Put the transmission in position P. Turn on your vehicle ignition
and the radio.
1. Press the Phone corner of the touchscreen > Settings > BT

Devices > Add Device.

2. Make sure that Bluetooth is set to On and that your cellular phone is

in the proper mode. See your phone’s manual if necessary.

• Select SYNC, and a six-digit PIN appears on your device.

3. If you are prompted to enter a PIN on your device, it does not

support Secure Simple Pairing. To pair, enter the PIN displayed on
the touchscreen. Skip the next step.

400

MyFord Touch® (If Equipped)

2014 Focus (foc)
Owners Guide gf, 2nd Printing, October 2012
USA
(fus)