FORD 2014 Focus v.2 - Manual (Page 285)

WARNING: Always use the jack provided as original equipment
with your vehicle. If using a jack other than the one provided as
original equipment with your vehicle, make sure the jack capacity is
adequate for the vehicle weight, including any vehicle cargo or
modifications.
Note: Passengers should not remain in the vehicle when the vehicle is
being jacked.
1. Park on a level surface, set the parking brake and activate the hazard
flashers.
2. Place the transmission selector lever in position P or N and turn the
engine off.
3. Remove the carpeted wheel
cover.
4. Remove the wing nut and bolt
assembly that secures the spare tire
and jack by turning it
counterclockwise.
5. Remove the lug wrench and jack from the foam holder.
6. Block the diagonally opposite
wheel.
7. Loosen each wheel lug nut one-half turn counterclockwise but do not
remove them until the wheel is raised off the ground.
8. The vehicle jacking points are
shown here, and are depicted on the
yellow warning label on the jack.
Note: Jack at the specified locations
to avoid damage to the vehicle.
9. Remove the lug nuts with the lug wrench.
284 Wheels and Tires
2014 Focus (foc)
Owners Guide gf, 2nd Printing, October 2012
USA (fus)