Setting a speed, Changing the set speed, Canceling the set speed – FORD 2014 Focus v.2 User Manual
Page 189: Resuming the set speed, Switching cruise control off, 188 cruise control

Setting a Speed
1. Accelerate to the desired speed.
2. Press and release SET+.
3. Take your foot off the accelerator pedal.
Changing the Set Speed
• Press and hold SET+ or SET-. Release the control when you reach
the desired speed.
• Press and release SET+ or SET-. The set speed will change in
approximately 1 mph (2 km/h) increments.
• Press the accelerator or brake pedal until you reach the desired
speed. Press and release SET+.
Canceling the Set Speed
Pull CAN toward you and release, tap the brake pedal or press the
clutch pedal. You will not erase the set speed.
Note: When you use the clutch pedal to cancel a set speed, the engine
speed may briefly increase.
Resuming the Set Speed
Pull RES toward you and release.
Switching Cruise Control Off
Note: You will erase the set speed if you switch the system off.
Press and release OFF or switch the ignition off.
188
Cruise Control
2014 Focus (foc)
Owners Guide gf, 2nd Printing, October 2012
USA (fus)