Keys and remote controls – FORD 2014 Fiesta v.2 User Manual

Page 47

E162601

Note: Your vehicle’s keys came with a
security label that provides important
vehicle key cut information. Keep the label
in a safe place for future reference.

Intelligent Access Transmitter

(If

Equipped)

Your intelligent access keys operate the
power locks. The key must be in your
vehicle to activate the push button start
system.

The intelligent access key also contains a
removable mechanical key blade that you
can use to unlock the driver door.

E87964

Note: Your vehicle’s back-up keys came
with a security tag that provides important
vehicle key cut information. Keep the tag in
a safe place for future reference.

Reprogramming the Unlocking

Function

Note: When you press the unlock button
either all the doors are unlocked or only the
driver’s door and the liftgate are unlocked.
Pressing the unlock button again unlocks
all the doors.

You can reprogram the unlocking function
using the remote control so that only the
driver's door is unlocked. This will enable
two-stage unlocking.

Press and hold the unlock and lock buttons
on the remote control simultaneously for
at least four seconds with the ignition off.
The direction indicators will flash twice to
confirm the change.

To return to the original unlocking function,
repeat the process.

Replacing the Battery

Note: Refer to local regulations when
disposing of transmitter batteries.

Note: Do not wipe off any grease on the
battery terminals or on the back surface of
the circuit board.

Note: Replacing the battery will not delete
the transmitter from the vehicle. The
transmitter should operate normally.

The remote control uses one coin-type
three-volt lithium battery CR2032 or
equivalent.

Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013

Keys and Remote Controls