beautypg.com

Wheels and tires – FORD 2014 Fiesta v.2 User Manual

Page 216

background image

test wheel. Sustained high

temperature can cause the

material of the tire to degenerate

and reduce tire life, and excessive

temperature can lead to sudden
tire failure. The grade C
corresponds to a level of
performance which all passenger
car tires must meet under the
Federal Motor Vehicle Safety
Standard No. 139. Grades B and A
represent higher levels of
performance on the laboratory
test wheel than the minimum
required by law.

Glossary of Tire Terminology

* Tire label: A label showing the
OE (Original Equipment) tire sizes,

recommended inflation pressure

and the maximum weight the

vehicle can carry.
*Tire Identification Number

(TIN): A number on the sidewall

of each tire providing information
about the tire brand and

manufacturing plant, tire size and

date of manufacture. Also referred

to as DOT code.
*Inflation pressure: A measure

of the amount of air in a tire.
*Standard load: A class of
P-metric or Metric tires designed

to carry a maximum load at 35 psi

[37 psi (2.5 bar) for Metric tires].
Increasing the inflation pressure
beyond this pressure will not
increase the tire’s load carrying
capability.

*Extra load: A class of P-metric

or Metric tires designed to carry a

heavier maximum load at 41 psi

[43 psi (2.9 bar) for Metric tires].

Increasing the inflation pressure
beyond this pressure will not
increase the tire’s load carrying
capability.

*kPa: Kilopascal, a metric unit of
air pressure.

*PSI: Pounds per square inch, a
standard unit of air pressure.

*Cold tire pressure: The tire
pressure when the vehicle has

been stationary and out of direct

sunlight for an hour or more and

prior to the vehicle being driven for
1 mile (1.6 kilometers).
*Recommended inflation

pressure: The cold inflation

pressure found on the Safety
Compliance Certification Label

(affixed to either the door hinge

pillar, door-latch post, or the door

edge that meets the door-latch

post, next to the driver's seating

position), or Tire Label located on
the B-Pillar or the edge of the

driver’s door.
*B-pillar: The structural member
at the side of the vehicle behind

the front door
* Bead area of the tire: Area of

the tire next to the rim.

* Sidewall of the tire: Area
between the bead area and the
tread.

213

Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013

Wheels and Tires