Using advancetrac® with rsc® (if equipped), 136 stability control – FORD 2014 E-450 v.3 User Manual
Page 137
USING ADVANCETRAC® WITH RSC® (IF EQUIPPED)
The system automatically activates when you start your engine. The
AdvanceTrac with RSC system cannot be completely turned off, but the
electronic stability system and roll stability control portions of the
system are disabled when the transmission is in reverse (R). You can
turn off the traction control portion of the system independently. See the
Traction Control chapter.
AdvanceTrac with RSC Features
Button
functions
Stability
control light
TCS OFF
light
RSC/ESC
TCS
Default at
start-up
Illuminated
during bulb
check
Illuminated
during bulb
check
Enabled
Enabled
Button pressed
momentarily
Not
illuminated
Illuminated
solid
Enabled
Disabled
below
20 mph
(32 km/h)
Button pressed
again after
deactivation or
driving above
20 mph
(32 km/h)
Not
illuminated
Not
illuminated
Enabled
Enabled
If you switch off the traction control system below 20 mph (32 km/h),
the TCS OFF light will illuminate steadily. Press the TCS OFF button
again or if the vehicle is above 20 mph (32 km/h) to turn off the TCS
OFF light. The switch will not allow partial traction control system
disabling above 20 mph (32 km/h).
136
Stability Control
2014 Econoline (eco)
Owners Guide gf, 3rd Printing, September 2013
USA (fus)