FORD 2015 Transit v.2 - Manual (Page 130)

You cannot use the operator
commanded regeneration if the
service engine soon light is
illuminated.
Using the Information Display
You can start operator commanded
regeneration using the information display.
See General Information (page 78).
To start operator commanded regeneration, run the engine at normal operating
temperature and scroll to:
Action and Description Message
Press the OK button. Settings
Press the OK button. Exhaust Filter
Full
OK = Cleaning
Select one of the following:
Press the OK button and then follow the prompts regarding
exhaust position as needed to initiate operator commanded
regeneration. Be sure to understand each prompt. If you are
not sure what is being asked by each prompt, contact an
authorized dealer. The display will confirm the operation has
started and when it has finished. Exhaust Filter
Full
Press the OK button and then follow the prompts regarding
exhaust position as needed to initiate operator commanded
regeneration. Be sure to understand each prompt. If you are
not sure what is being asked by each prompt, contact an
authorized dealer. The display will confirm the operation has
started and when it has finished. Exhaust Filter
Overloaded
If the diesel particulate filter is near or at saturation, a message requesting
permission to initiate filter cleaning will display.
Action and Description Message
Press the OK button and then follow the prompts regarding
exhaust position as needed to initiate operator commanded
regeneration. Be sure to understand each prompt. If you are
not sure what is being asked by each prompt, contact an
authorized dealer. The display will confirm the operation has
started and when it has finished. Exhaust Filter
At Limit
127
Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing
Fuel and Refueling