FORD 2015 Fusion - Manual (Page 124)

Driver heated seat control (if equipped): Turn the driver heated seat off
and on. See Heated Seats (page 135). A
Driver temperature control: Press + or - to increase or decrease the air
temperature for the driver side of the vehicle. This control also adjusts the
passenger side temperature when not in dual zone mode. B
Power: Press the button to turn the system on and off. Switching off the climate
control system prevents outside air from entering the vehicle. C
Fan speed control: Touch + or - to increase or decrease the volume of air
circulated in the vehicle. D
Passenger temperature control: Press + or - to increase or decrease the air
temperature on the passenger side of the vehicle. This turns on dual zone mode. E
Passenger heated seat control (if equipped): Turn the passenger heated
seat off and on. See Heated Seats (page 135). F
Recirculated air: Press the button to switch between outside air and
recirculated air. When you select recirculated air, the air currently in the
passenger compartment recirculates. This may reduce the time needed to cool
the interior (when used with A/C) and may reduce unwanted odors from
entering your vehicle. G
Note: Recirculated air may turn off automatically (or be prevented from turning
on) in all airflow modes except MAX A/C to reduce risk of fogging. Recirculated
air may also turn on and off automatically in Panel or Panel and Floor airflow
modes during hot weather in order to improve cooling efficiency.
A/C: Press the button to turn air conditioning compressor on or off. Use air
conditioning with recirculated air to improve cooling performance and efficiency. H
Note: In certain conditions (such as when using Max Defrost), the air
conditioning compressor may continue to operate even after you switch off the
air conditioning with the A/C button.
MAX A/C: Press the button to maximize cooling. Recirculated air flows through
the instrument panel vents, air conditioning automatically turns on, and the fan
automatically adjusts to the highest speed. I
AUTO: Press the button to turn on automatic operation. Select the desired
temperature using the temperature control. The system adjusts fan speed, air
distribution, air conditioning operation, and selects outside air or recirculated
air to heat or cool the vehicle in order to maintain the desired temperature. You
can also use the AUTO button to turn off dual zone operation by pressing and
holding the button for more than two seconds. J
Heated rear window: Turns the heated rear window on and off. See Heated
Windows and Mirrors (page 126). K
Defrost: Press the button to distribute air to the windshield vents and de-mister.
Air distribution to instrument panel and footwell vents turn off. You can use
this setting to defog and clear the windshield of a thin covering of ice. L
121
Fusion/Mondeo (CC7), enUSA
Climate Control