FORD 2015 E-450 - Manual (Page 77)

SETUP
TBC MODE
(if equipped) press and
hold the
SELECT/RESET
stem Electric or EOH
LANGUAGE =
ENGLISH /
SPANISH /
FRENCH English / Spanish / French
SYSTEM CHECK
RESET FOR
SYSTEM CHECK press and
hold the
SELECT/RESET
stem XXX% OIL LIFE
ENGINE HOURS (if enabled)
ENGINE IDLE HOURS
(if enabled)
CHARGING SYSTEM
BRAKE SYSTEM
TBC GAIN = XX.X or NO
TRAILER (if equipped)
TBC GAIN = XX.X or OUTPUT =
////// (if equipped)
XXX MILES TO E
• OIL LIFE XXX% HOLD RESET = NEW: This displays the remaining
oil life. An oil change is required whenever indicated by the message
center and according to the recommended maintenance schedule.
USE ONLY RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change,
perform the following:
1. Press and release the SELECT/RESET stem to display OIL LIFE
XXX% HOLD RESET = NEW.
2. Press and hold the SELECT/RESET stem for two seconds and release
to reset the oil life to 100%.
To change oil life 100% value (if equipped):
3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
SELECT/RESET stem to change the oil life start value. Each release and
press will reduce the value by 10%.
76 Information Displays
2015 Econoline (eco)
Owners Guide gf, 1st Printing, June 2014
USA (fus)