Repairing a flat tire – BMW M3 Convertible 2004 User Manual

Page 142

142

Components of the M Mobility
system

1 On/Off switch

2 Connection hose with manometer for

connecting the compressor with the
sealant container or to connect the
compressor to the wheel

3 Manometer for indicating the tire

pressure

4 Connector hose from the sealant

container to the wheel

5 Sticker with speed limit

6 Plug and cable for the cigarette

lighter socket

7 Protective gloves, not shown

Filling with sealant

1. Take off the round cover and take out

hose 4. Unscrew the valve dust cap
from the defective wheel and screw
the hose to the valve. Keep the dust
cap in a safe place

2. Flip open the cover and pull out the

enclosed protective gloves. Take out
hose 2 with the manometer and
screw it to the terminal for the seal-
ant container as shown in the illustra-
tion

3. Make sure that the system has been

switched off, position 0.
Take out plug 6 and insert it into the
cigarette lighter socket in the pas-
senger compartment, refer to
page

103

Repairing a flat tire