Brake fluid, Coolant – BMW M3 Convertible 2004 User Manual

Page 129

129

3. If necessary, add coolant. If the cool-

ant is low, slowly add coolant until
the correct level is reached — do not
overfill.

Brake fluid

Indicator lamp

The brake warning lamp comes
on when the parking brake is
not engaged: brake fluid level

too low, refer to page

Brake warning lamp for Cana-
dian models.

Adding brake fluid

For adding brake fluid or for determin-
ing and correcting the cause of brake
fluid loss, consult your BMW center.
Your BMW center is familiar with the
specifications for factory-approved
brake fluids – DOT 4.

Due to loss in brake fluid, pedal travel
can lengthen and braking efficiency
may be reduced. Refer to the informa-
tion on page

114

Brake fluid is hygroscopic, that is,
it absorbs moisture from the air

over time.
In order to ensure the safety and reli-
ability of the brake system, have the
brake fluid changed every two years by
a BMW center. Refer also to the Service
and Warranty Information Booklet for
US models or the Warranty and Service
Guide Booklet for Canadian models.
Brake fluid is toxic and damages the
vehicle's paint. You should always store
it in its closed original container and in
a location inaccessible to children.
Do not spill the brake fluid and do not
fill the brake fluid reservoir beyond the
MAX mark. The brake fluid could ignite
upon contact with hot engine parts and
cause serious burns.

Comply with the applicable envi-
ronmental laws regulating

the disposal of brake fluid.

Coolant

Overview

Controls

Maintenance

Repairs

Data

Index