Cargo area – BMW X5 4.8is SAV 2004 User Manual

Page 128

126

Cargo area

2. Remove the partition net from the

bag, unroll it half way and hook it into
the retaining strap on both sides,
refer to arrow

Note how the partition net is
stored in the bag and secured in

the vehicle so that you can return
everything to its proper place again
after use.
If your vehicle has a pull-out cargo
floor, observe the note on page

128

530de350

3. Slide back the covers on the retain-

ers for the partition net on both sides
of the roof, refer to arrow

4. Insert the curved ends of the parti-

tion net rod in the retainers on both
sides

5. Now you can slide the covers toward

the front again, refer to arrow

530de289

6. Pull down the partition net downward

on both sides by the loop, refer to
arrow, and hook the hook into the
eye on the backrest

The case with the roll-up cover is
not shown in the illustration. With

the case removed it is easier to hook
the hooks of the partition net onto the
backrest.

530de351