BMW 745i Sedan 2004 - Manual (Page 88)

Everything under control
86
> Computer
> Trip computer
It is best to use this for driving on vaca-
tion, as when you reset the values to
zero, all the functions are reset together
and then restart.
Computer
> Time of arrival
> Distance to destination.
Enter a destination in the navigation
system, or enter a distance in the com-
puter manually, refer to page
132 or 86
> Cruising range
> Average fuel consumption
> Average speed.
You can reset calculations of both
average speed and average fuel con-
sumption to zero. Select the menu item and
confirm.
<
Trip computer
Reset all data to zero:
Select "START / RESET" and confirm.
> Time of departure
> Driving time
> Elapsed distance
> Average fuel consumption since
"START / RESET"
> Average speed since "START /
RESET".
Entering a distance manually
1. Select computer "BC"
2. Select and activate the "Distance" entry
function. Turn the controller to the left
or right to select the distance to your
destination
3. Press the controller to confirm your
entry.
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example,
to receive warnings if you exceed a speed
limit in an urban area.
You are only warned of reaching this speed
a second time if you again drive at least
3 mph/5 km/h slower.
Adjusting, changing
1. Select "Limit" and confirm
2. Select "SET" and confirm
Online Edition for Part No. 01 41 0 157 670 - © 08/03 BMW AG