BMW 745i Sedan 2004 User Manual
Page 159
157
strong sources of radio interference.
Service should resume normally after the
source of signal unavailability has been
cleared.
<
Selecting a category
1.
Select "SAT..." and keep pressing until
"Category" appears.
The categories are shown in the cate-
gory list
2.
Select a category, e.g. "POP", and con-
firm.
All the channels available in the cate-
gory "POP" are displayed
3.
Storing channels and selecting memory
locations, refer to next section. Addi-
tional information, refer to page
Storing a channel
1.
Select "SAT..." and confirm
2.
Select the desired channel
3.
Select "STORE" and confirm.
After confirming, you are in the preset
list
4.
Turn the controller and select a memory
location where the channel is to be
stored and press the controller for sev-
eral seconds.
Selecting a stored channel
Turn the controller in the preset list to
select and confirm stored channels.
Up to twelve previously stored stations can
be selected.
Next channel
Press to select the desired direction.
The next channel that appears on the Con-
trol Display is selected.
1.
{
Radio}
2.
{
Station 1 ..12}.
Online Edition for Part No. 01 41 0 157 670 - © 08/03 BMW AG