BMW X3 2.5i SAV 2005 - Manual (Page 27)

Adju
stmen
ts
26
Adjustments
Height adjustment:
> To raise: pull upward.
> To lower: press button, arrow 1, and slide
head restraint downward.
Front head restraint tilt angle: adjust by tilting.
Removing front head restraint
1. Pull the head restraint upward to the stop.
2. Press button, arrow 1, and pull head
restraint all the way out.
Installing front head restraint
1. Press button, arrow 1, and slide the head
restraint into its sockets.
2. Adjust the head restraint.
Power seat*
To ensure that the safety systems con-
tinue to provide optimal protection,
please observe the adjustment instructions on
page
24 . <
1 Tilt
2 Longitudinal direction
3 Height
4 Backrest
Setting the head restraint manually, refer to
above paragraph.
Lumbar support*
You can also adjust the contours of the backrest
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.
> To increase or decrease curvature: press
switch forward or back.
> To move curvature up or down: press
switch up or down.
Seat and mirror memory*
You can store and select three different adjust-
ment settings for the driver's seat and exterior
mirrors.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1. Turn the ignition key to position 1 or 2.
2. Set the desired seat and exterior mirror
position.
Online Edition for Part-No. 01 41 0 158 448 - © 09/04 BMW AG