Entering the rear, Head restraints – BMW M3 Convertible 2006 User Manual

Page 49

Rear head restraints

The rear head restraints may only
be lowered if there are no passen-

gers in the rear seats. If you do so, you
are in violation of the law. Raise the rear
head restraints before taking on any
passengers in the back.

To completely lower the rear head
restraints:

1. Press the button and hold it down
2. Push the head restraint down from

above.

Raising the rear head restraints

Raise the head restraints until you hear
them click into place.

Do not remove the rear head
restraints as this would damage

them.

For further information, please consult
your BMW center.

Do not use the rear head
restraints as storage shelves.

Always keep the travel path for the roll-
over protection system free and clear.
Under no circumstances should you put
any kind of cover such as an antima-
cassar on the head restraints, refer also
to the labeling on the head restraints.

Entering the rear

The seat-integrated safety belt system
allows for easy access to the rear.

1. Lift lever 1 up and tilt the backrest

forward until it engages

2. Press and hold button 2 in driving

direction until the seat moves to the
desired position

3. After entering the rear, fold back and

lock the backrest

4. Press button 2 opposite the direction

of travel and hold. The seat moves
back into its previous position. If the
button 2 is released beforehand, the
seat stops in the respective position.

Head restraints

Overview

Controls

Maintenance

Repairs

Data

Index