Turn signal indicator, Indicator and warning lamps – BMW M3 Convertible 2006 User Manual

Page 20

Dynamic Stability Control
DSC

●

The indicator lamp flashes and

an acoustic signal sounds: the system
is active and governs drive and braking
force.
If the indicator lamp fails to go out after
the engine is started, or if it comes on
during normal driving and stays on:
DSC has been deactivated, either at the
button or in response to a system mal-
function.
If there is a malfunction, have the sys-
tem checked as soon as possible.
For additional information, refer to
page

Dynamic Brake Control (DBC)

●

Malfunction in DBC system.
Conventional braking efficiency

is available and unrestricted.
Have the system checked as soon as
possible.
For additional information, refer to
page

113

Dynamic Brake Control (DBC)
warning lamp for Canadian
models.

Add washer fluid
The washer fluid level is too low,
top it up at the earliest opportu-

nity.
For additional information, refer to
page

126

SERVICE ENGINE SOON

●

If the indicator lamp comes on
either continuously or intermit-

tently, this indicates a fault in the emis-
sions-related electronic systems.
Although the vehicle remains opera-
tional, you should have the systems
checked by your BMW center at the
earliest possible opportunity.
For additional information: Refer to
page

132

Service Engine Soon indicator
lamp for Canadian models.

Engine electronics

●

There is a fault in the electronic
engine-management system.

You can continue to drive with reduced
engine output or engine speed. Please
have the system inspected at your
BMW center.

Add coolant
Coolant level too low, top up as
soon as possible.

For additional information, refer to
page

128

CHECK GAS CAP*

●

This indicator lamp comes on
when the gas cap is loose or

missing.
Close the gas cap tightly: refer to
page

Rollover protection system

●

The rollover protection system is
deactivated due to a malfunc-

tion. Please have the system inspected
immediately at your BMW center.
For additional information, refer to
page

Green: for your information

Turn signal indicator
Flashes when turn signals are
on. Rapid flashing: indicates a

system malfunction.
For additional information, refer to
page

Indicator and warning lamps