Jump-starting – BMW M3 Convertible 2006 User Manual

Page 148

148

3. Connect the second terminal clamp

of the plus/+ jumper cable to the
positive terminal of the battery or to a
jump-starting terminal in the vehicle
to be started

4. Your BMW is equipped with a special

nut – see arrow 2 – to serve as the
ground or negative terminal.
Attach a terminal clamp of the
minus/– jumper cable to the negative
terminal of the support vehicle's bat-
tery or to a suitable ground on its
engine or bodywork

5. Attach the second terminal clamp of

the minus/– jumper cable to the neg-
ative terminal of the battery or to a
suitable ground on the engine or
bodywork of the vehicle to be
started.

Starting the engine

1. Start the engine of the support vehi-

cle and let it run for several minutes
at a slightly elevated engine idle
speed

2. Start the engine of the other vehicle

as usual.
If the first start attempt is not suc-
cessful, wait a few minutes before
another attempt in order to allow the
discharged battery to recharge

3. Allow the engines to run for several

minutes

4. Disconnect the jumper cables in

reverse sequence.

Have the battery recharged at your
BMW center as required.

Do not use spray starter fluids to
start the engine.

Jump-starting