BMW 335i Convertible 2007 - Manual (Page 235)

M
o
bi
lity
233
Re
fe
re
n
c
e
At
a
g
la
n
c
e
Co
n
tr
o
ls
D
riv
in
g ti
ps
C
o
m
m
uni
ca
ti
o
n
s
Na
v
iga
ti
on
En
te
rt
a
in
m
e
n
t
2. Loosen the bulb holder at the clip, see
arrow, and pull out.
3. Turn signal indicator: apply gentle pressure
to the bulb while turning it to the left for
removal and replacement.
Backup lamps and brake lamps: take out
the bulbs and change them.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo bay.
Convertible
1. Turn the screws on the corresponding side,
see arrow, by 90° and remove the cover.
2. While applying light pressure, turn the bulb
holder of the turn signal bulb to the left.
3. Remove and replace the bulb.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo bay.
License plate lamp
C5W bulb, 5 watts
1. Using a screwdriver, push the lamp to the
right in the flap of the lamp housing.
2. Take out the lamp towards the left and
change the bulb.
3. Insert the lamp.
Center brake lamp
This lamp uses LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
Changing wheels
Your BMW is equipped with Run-Flat Tires as
standard. This removes the need to change a
wheel immediately in the event of a puncture.
Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG