beautypg.com

BMW Z4 Roadster 3.0si 2008 User Manual

Page 65

background image

Re

fe

re

n

c

e

A

t a

g

lanc

e

Co

n

tr

o

ls

D

riv

in

g tip

s

M

o

b

ilit

y

63

Air distribution

Direct the flow of air to the windows

, to the upper body area

and to

the footwell

. Intermediate settings

are possible.

Switching cooling function on/off

When the cooling function is on, the
air is cooled, dehumidified, then
reheated depending on the tempera-
ture setting.

Depending on the weather, the windshield may
fog over briefly when the engine is started.

Recirculated-air mode

If the air outside the car has an
unpleasant odor or contains pollut-
ants, temporarily shut off the supply
to the interior of the car. The system

recirculates the air within the vehicle.

If the windows fog over in the recircu-
lated-air mode, you should switch it off

and, if necessary, increase the air flow rate.
The manually controlled recirculated-air mode
should not be used continuously for lengthy
periods, otherwise the quality of the air inside
the car will gradually deteriorate.

<

Temperature

For a higher temperature, turn the
rotary switch clockwise towards red.
For a lower temperature, turn the
rotary switch counterclockwise

towards blue.

Air flow rate

Adjust the air flow rate. The higher
the rate, the more effective the heat-
ing or cooling will be.

Switching the system on/off

Set the air flow rate to 0. Blower and air condi-
tioning are switched off and the air supply is cut
off.
To switch on the heater or air conditioning, set
any desired air flow rate.

Rear window defroster

The defroster switches off automati-
cally after a certain time.

Defrosting windows and removing
condensation

1.

Air distribution

1 in position

.

2.

Set air flow rate

2 to position 4.

3.

Temperature

3 to the right, red.

4.

Switch on rear window defroster

4 to

defrost the rear window.

Ventilation

1 Knurled wheels to set any vent position

from fully open to closed

2 Slide for adjusting air flow direction

Ventilation for cooling

Adjust the vent outlets to direct the flow of cool
air toward you, for instance if it has become too
hot in the car.

Draft-free ventilation

Set the vent outlets so that the air flows past
you and not straight at you.

Online Edition for Part no. 01 41 0 014 500 - © 08/07 BMW AG

This manual is related to the following products: