Changing a wheel – BMW Z4 Roadster 3.0si 2008 User Manual
Page 103
101
Rear lamps
1 Turn signal indicators, 21 watts, PY21W
Silver Vision
2 Brake lamp, 21 watts, P21W
3 Backup lamp, 16 watts, W16W
4 Tail lamp, LED
5 Brake lamp, 21 watts, H21W
In the event of a malfunction in lamp
4 or 5,
please contact your BMW center or a workshop
that works according to BMW repair proce-
dures with correspondingly trained personnel.
Changing bulbs
1.
Remove the cover in the cargo bay by turn-
ing the lock, see arrow.
2.
Apply gentle pressure to the bulb socket
while turning it to the left and remove it.
3.
Remove and replace the bulb.
4.
Insert bulb socket.
5.
Reattach the cover.
Side marker lamps, rear
To change the bulbs, please contact your BMW
center or a workshop that works according to
BMW repair procedures with correspondingly
trained personnel.
Center high-mount brake lamp
This lamp uses LED technology for operation.
In the event of a malfunction, please contact
your BMW center or a workshop that works
according to BMW repair procedures with cor-
respondingly trained personnel.
License plate lamps
5-watt bulb, W5W
1.
Push out the lamp with a screwdriver and
remove it.
2.
Change the bulb and reinsert the lamp.
Changing a wheel
Run-Flat Tires
Your BMW is equipped with Run-Flat Tires as
standard. Therefore, no wheel has to be
changed immediately in the event of a loss in
inflation pressure.
Run-Flat Tires are labeled on the tire sidewall
with a circular symbol containing the letters
RSC. Also observe the information on page
.
When mounting new tires or changing over
from summer to winter tires and vice versa,
mount Run-Flat Tires for your own safety. In the
event of a flat, moreover, no spare wheel is
available. Your BMW center will be glad to
advise you. Refer also to Wheel and tire
replacement, page
.
The tools for changing wheels are avail-
able as optional accessories from your
BMW center.
<
Online Edition for Part no. 01 41 0 014 500 - © 08/07 BMW AG