beautypg.com

Drive-off assistant, Te chnology for driving comfort and safe ty – BMW 135i Coupe 2008 User Manual

Page 84

background image

T

e

chnology for

driving comfort

and

safe

ty

82

Deactivating DSC

Press the button for at least 3 seconds; the indi-
cator lamps for DSC in the instrument cluster
light up. Dynamic Traction Control DTC and
DSC have been simultaneously deactivated.
Stabilizing and drive-output promoting actions
are no longer executed.
in the same way as with a differential interlock,
even if DSC is deactivated, brake actions are
still performed on the rear axle to enhance drive
output if the drive wheels experience a signifi-
cant loss of traction.
To increase vehicle stability, activate DSC again
as soon as possible.

Activating DSC

Press the button again; the indicator lamps for
DSC in the instrument cluster go out.

For better control

If the indicator lamp flashes:
DSC is regulating the drive and braking
forces.

If the indicator lamps are on:
DSC is deactivated.

Dynamic Traction Control DTC

DTC is a version of DSC in which the drive out-
put is optimized for particular road conditions,
e.g. unplowed snow-covered roads. The sys-
tem assures the maximal drive output, but with
reduced driving stability. It is therefore neces-
sary to drive with appropriate caution.
You may find it useful to briefly activate DTC
under the following special circumstances:

>

When driving uphill on snow-covered roads,
in slush or on unplowed, snow-covered
roads

>

When rocking a stuck vehicle free or start-
ing off in deep snow or on loose ground

>

When driving with snow chains

Activating DTC

Press the button; the indicator lamps for DTC in
the instrument cluster come on.

For better control

If the indicator lamp flashes:
DTC is regulating the drive and braking
forces.

If the indicator lamps are on:
DTC has been activated.

Deactivating DTC

Press the button again; the DTC indicator
lamps in the instrument cluster go out.

Drive-off assistant

The drive-off assistant enables you to drive off
smoothly on uphill gradients. It is not necessary
to use the parking brake for this.

1.

Hold the car in place by depressing the
brake.

2.

Release the brake and drive off without
delay.

The drive-off assistant holds the car in
place for approx. 2 seconds after the

brake is released. Drive off without delay after
releasing the brake. Otherwise, the drive-off

Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG

This manual is related to the following products: