BMW 135i Coupe 2008 - Manual (Page 220)

Replacing components
218
4. Attach the connector, insert the bulb and
turn it all the way in the opposite direction.
5. Attach the headlamp cover.
Corner-illuminating lamps
H3 bulb, 55 watts
The figure shows the right-hand headlamp.
1. Remove the top headlamp cover, using the
screwdriver to push the detents to one side.
2. Turn the bulb holder, see arrow, and
remove it.
3. Slide the bulb out of the holder and pull off
the connector.
4. Replace the bulb and attach the connector.
5. Insert the bulb holder and turn it all the way
in the opposite direction.
6. Attach the headlamp cover.
Turn signals, front
21 watt bulb, PY21W Silver Vision
The turn signal bulb can be changed via a cover
in the wheel arch.
1. Turn the respective wheel inwards.
2. Using a coin, turn both locks of the cover all
the way to the left, arrow
1, and remove the
cover.
3. Turn the bulb holder to the left and remove
it, arrow
2.
4. Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
5. Insert the bulb holder and lock it by turning
it to the right.
6. Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Tail lamps
> Turn signal:
21 watt bulb, PY21W
> Backup lamp:
16 watt bulb, W16W
> Brake lamps:
21 watt bulb, P21W
> Brake Force Display lamp:
21 watt bulb, H21W
1 Inner brake lamp
2 Outer brake lamp
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG