Replacing components, Onboard vehicle tool kit, Wiper blades – BMW M3 Coupe 2010 User Manual
Page 231: Lamps and bulbs
229
Replacing components
Onboard vehicle tool kit
Sedan
The onboard vehicle tool kit is stored in a com-
partment on the right-hand side of the cargo
area. Remove the cover.
Sports Wagon
The onboard vehicle tool kit is stored in a com-
partment on the left-hand side underneath the
cargo area floor panel.
Wiper blades
1.
Fold out the wiper arm and hold it.
2.
Press together the locking spring, arrows
1,
and fold out the wiper blade, arrow
2.
3.
Take the wiper blade out of the catch mech-
anism, pulling the blade toward the front.
To avoid damage, make sure that the
wiper arms are against the windshield
before you open the engine compartment.
<
Sports Wagon: changing rear wiper
blade
1.
Fold up the wiper arm.
2.
Pull off the wiper blade, see arrow.
3.
Insert the new wiper blade and press it on
until it audibly engages.
Lamps and bulbs
Lamps and bulbs make an essential contribu-
tion to vehicle safety. They should, therefore,
be handled carefully. BMW recommends hav-
ing your BMW center perform any work that you
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 603 066 - © 08/09 BMW AG