BMW 1 Series M Coupe 2011 - Manual (Page 34)

33
Replacing components Mobility
8 Pressure gauge for displaying the tire infla-
tion pressure
9 Deflation button for reducing the inflation
pressure
The connector, cable and connection hose are
stored in the compressor housing.
Using the Mobility System
To repair a flat tire with the Mobility System,
proceed as follows:
> Fill with sealant.
> Distribute the sealant.
> Correct the tire inflation pressure.
Filling with sealant
Follow the specified sequence, otherwise
the sealant may escape under high pres-
sure. <
1. Shake the sealant bottle.
2. Remove connecting hose completely from
the compressor housing.
3. Screw the connecting hose to the connec-
tion of the sealant bottle. Do not kink the
hose.
4. Insert the sealant bottle into the housing of
the compressor so that the bottle is upright.
5. Screw the filler hose of the sealant bottle
onto the valve of the faulty tire.
6. Ensure that the compressor is switched off.
7. Insert the plug into the power socket in the
vehicle interior.
Online Edition for Part no. 01 40 2 609 935 - © 08/11 BMW AG