BMW 1 Series M Coupe 2011 - Manual (Page 33)

32
Mobility Replacing components
Replacing components
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. For this reason, descrip-
tions will be given of some equipment that may
not be available in a vehicle, for example due to
the special options or national-market version
selected. This also applies to safety related
functions and systems.
Flat tire, repairing
Safety measures in the event of a flat tire:
Park the vehicle as far away from moving
traffic as possible and on a firm surface. Switch
on the hazard warning flashers.
Set the parking brake and shift into first gear or
reverse. Have all occupants leave the vehicle
and move beyond the danger zone, e.g. behind
the guard rails.
If necessary, set up a warning triangle or warn-
ing flasher at a suitable distance. Adhere to
country-specific regulations.
<
BMW Mobility System
Notes
> Follow the instructions on using the
Mobility System found on the compressor
and the sealant bottle.
> Use of the Mobility System may not be
effective against tire damage larger than
approx. 0.16 in/4 mm.
> Contact the nearest BMW center if the tire
cannot be made drivable with the Mobility
System.
> If possible, leave any foreign bodies that
have penetrated the tire in place.
> Remove the label with the speed restriction
from the sealant bottle and apply it to the
steering wheel.
Storage
The Mobility System is stored in the cargo area
under the floor mat.
Sealant cylinder and compressor
1 Sealant bottle and label with speed restric-
tion
2 Filling hose
Note the use-by date on the sealant bottle.
3 Holder for sealant bottle
4 Compressor
5 Connector/cable for socket
6 Hose to connect compressor and sealant
bottle or compressor and wheel
7 On/off switch
Online Edition for Part no. 01 40 2 609 935 - © 08/11 BMW AG