BMW 328i xDrive Sports Wagon 2011 - Manual (Page 243)

M
o
bi
lity
241
Refere
nce
At a glan
ce
Co
n
tr
o
ls
Dr
ivi
n
g ti
ps
Co
mm
un
icat
io
ns
Navigation
Ente
rt
ai
nme
n
t
Turn signals, front
PY24W bulb, 24 watts
1. Open the flap in the wheel well, refer to
Access through the wheel well on
page
240 .
2. Rotate turn signal bulb socket 1 to the left
and remove.
3. Apply gentle pressure to the bulb while
turning it to the right for removal and
replacement.
4. Insert turn signal bulb socket 1.
5. Attach the flap to the wheel well.
Side turn signals
W5W bulb, 5 watts
1. Press the front edge of the lamp toward the
rear with your fingertip, arrow
1 and pivot it
out, arrow 2.
2. While simultaneously lifting the retaining
tab, rotate bulb holder to the left and
remove.
3. Remove lamp and replace it.
To install, insert rear end of the lamp and press
into place at the front.
Tail lamps
Sedan
> Brake lamp in the trunk lid:
H21W bulb, 21 watts
> Backup lamp:
W16W bulb, 16 watts
> Other lamps:
P21W bulb, 21 watts
The tail lamps are divided in two parts. One part
is in the trunk lid, the other is in the fender.
1 Brake lamp
2 Roadside parking lamp/tail lamp, LED
3 Turn signal, LED
4 Backup lamp
5 Tail lamp, LED
6 Brake lamp
If one of the bulbs
2, 3 or 5 malfunctions, please
contact your BMW center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
Online Edition for Part no. 01 41 2 604 582 - © 02/10 BMW AG