Fitbit Flex - Manual (Page 25)

21
Your iOS device will now sync the alarm to your Flex.
N O T E : Make sure your Flex is nearby in order to sync your alarm. To force sync the
alarm to it, tap Account > Flex > Sync Now .
Setting silent alarms from an Android device
To set silent alarms using the Fitbit app for Android, Bluetooth must be enabled in
your Android device settings, as well as the Fitbit app Devices screen.
Your mobile device also must support wireless sync. To check if your device is
supported, see
http://www.fitbit.com/devices .
1. Open the Fitbit App.
2. Tap the menu button.
3. Tap Device Settings .
4. Choose Flex .
5. Tap Silent Alarm .
6. Tap Add a new alarm .
7. Tap Next .
8. Tap Add a new alarm .
9. Tap the time to enter a time.
10. If you prefer, tap the Repeats checkbox and tap the days of the week you
want this alarm to repeat.
11. Tap Done .
12. Tap the Sync tracker to save alarms button.
N O T E : Make sure your Flex is nearby in order to sync your alarm. To Force Sync the
alarm, tap the menu button > Device Settings > choose Flex > tap the Sync
Now icon.
Dismissing silent alarms
Your Flex will vibrate and the LEDs will illuminate when your silent alarm goes off.
This notification will repeat three times or until dismissed. You can dismiss the alarm
by tapping a few times after the vibration has stopped.
You’ll know your alarm has been dismissed when one light appears in the middle of
your Flex’s display, then slowly fades. If you do not dismiss the alarm, your Flex
alarm will repeat in nine minutes.