FASS T UIM 095G - Manual (Page 19)

Fuel Tank Vent Line
Fuel Tank
FASS Return
N. Locate Fuel Tank Vent Line and remove vent and vent line from tank. Thread tape reducer on both
ends and install reducer into tank. Once reducer has been secured install “T” onto reducer and secure.
Thread tape bushings and install them on the “T” . NOTE: Not all configurations will be able to be
assembled this way. Install the vent line on the top portion of the “T” and the FASS return line into
the middle of the “T”. Repeat previous steps on other tank to install the Double Vent Line Return Kit.
O. The below picture illustrates the configuration previously mentioned..