beautypg.com

FASS T C10 260G User Manual

Page 16

background image

I.

Apply motor oil to gasket located on filters. Attach to system and
hand tighten.

Fuel Filter –Install FWS-3003 on
side of pump with draw tube in
the middle of the filter nipple.

Water Separator Filter –Install FS-1001
on water separator nipple without the
draw tube. Make sure to insert O-Ring
provided on nipple.

Note: O-Ring must be put back on suction side of pump.
Failure to do so can result in priming issues, cavitation, or
pressure loses.

This manual is related to the following products: