FASS T F16 150G - Manual (Page 3)

FASS Recommended Application
T F16 095G Powerstroke 2008-2010 with stock - moderate horsepower modifications
T F16 150G Powerstroke 2008-2010 with moderate - extreme horsepower modifications
Note: Because of the higher fuel flow these systems have to offer, you may encounter problems
with the stock fuel module. FASS can solve this with a Suction Tube Kit.
Serial #
¡WARNINGs!
 Read all instructions before starting installation of this product!
 Installing the improper FASS Pump can cause severe engine damage.
 Secure vehicle from ROLLING!
 Cab and Chassis may require modifications
 Consult vehicle’s manufacturers’ instructions concerning the electrical system before at-
tempting any electrical connections.
 Be sure that the serial # on this installation manual matches that of the outside of the box.
 Flush and clean all brass fittings and fuel line from debris
 Keep debris from entering the internals of the system during installation. Getting debris in
the water separator nipple can lock up the motor. If the motor does lock up from debris call
FASS for technical assistance.
 Wear safety glasses when operating power tools such as drills and grinders or when using a
punch or chisel.
 Properly secure lines to prevent chaffing.