FASS T D10 125G - Manual (Page 17)

Note: The Red Plastic Plugs located in the “H” ports can stay in place fuel will not flow
through these ports. Coolant can be plumbed into these ports to heat the fuel in the Winter
months.
******The factory suction line can be capped off or removed from the truck. The openings on
the filter and tank will need to be capped off to keep debris from getting into lines or canis-
ter.**********
To assist with priming your FASS pump crack the FWS-3003. Put power to the FASS pump to acti-
vate the pump. When the tone of the pump changes you can tighten up the fuel filter. If you need a
video of the priming process go to www.FASSride.com.