Wire and grounding instructions, Assembling the vacuum, Assembling method – EdenPURE Bio SpeedCLEAN User Manual
Page 8
4
5
Wire and Grounding Instructions
model UV
To reduce the risk of electric shock, this
vacuum is equipped with a polarized
alternating current line plug (a plug
having one blade wider than the other).
This plug will fit into the power outlet
only one way. This is a safety feature. if
you are unable to insert the plug fully into
the outlet, try reversing the plug. if the plug
should still fail to fit, contact a
qualified electrician to replace the
obsolete outlet.
Do not attempt to defeat the safety purpose
of the polarized plug.
Assembling the Vacuum
IMPORTANT NOTE:
Under no circumstances should you plug in the vacuum cleaner
prior to complete assembly.
2. Assemble according to the following figures:
3. press the buttons at the dirt entrance of the dust bag, then mount
the dust bag on the unit.
After finishing the assembly, turn the
cord clip to 90 degrees as in the figure
to the left.
1. Unpack and take out the unit. Unscrew the two screws on the handle
assembly.
Assembling Method