EcoPure EPWUFF - Manual (Page 4)

2"
4
Parts & Tools
Typical Undersink Installation
Locate the water filter housing on the cold water supply pipe, under the kitchen and/or bathroom sink, to
filter the cold water. Refer to the following drawing.
= Filter head, bracket & mounting screws
= Filter cartridge
= Tubing
= Faucet adaptor
= Slotted and Phillips screwdrivers
= Pliers and adjustable jaw wrench
= Tubing cutter
= Electric drill
= Teflon tape
FIG. 2
NOTE: Be sure to allow a minimum space of 1-1/2” under
the system for removing the filter cartridge to change it.
1”
mounting
screws (2)
3/8” tubing
to faucet
OUTLET
blue collar on
push-in fitting
INLET
yellow collar on
push-in fitting
3/8” tubing
from cold
water supply
SINK
HOT COLD
shutoff valve
filtered water
faucet
OUTLET INLET
Included:
Not Included: