Dogtra 1100NC User Manual
Page 6
8
TRANSMITTER
Transmitter Antenna
A short 2” antenna is supplied with the
.
The antenna should be screwed into the top
of the transmitter to ensure that the signals are
sent properly to the collar receiver and that
maximum range is attained.
2” Antenna
9
TRANSMITTER
Intensity Selection Dial
The intensity selection dial is located on the top of
the transmitter.
In the fully counter clockwise position- zero
setting- no electrical stimulation occurs even when the
transmitter button is pressed (a satety feature).
Moving the dial from the “zero” setting in a
clockwise manner, electrical stimulation will begin .
Moving the dial clockwise, the level increases in a
linear progression - no steps or increments up to the
level one hundred (fully clockwise).
Conversely, moving the dial counter-clockwise, the
level reduces in a downward linear progression until at
the “zero” setting (fully counter-clockwise).
This feature allows for subtle adjustment of the level
(upward of downward) while the transmitter button is
held down continuously - providing e-linear training.