Dogtra 1100NC User Manual
Page 10
16
COLLAR
Receiver Indicator Light (LED)
Located on the front of the collar, the indicator
light comes on and blinks once every 2 seconds
after the collar is turned on.
The blinking will change from a single flash to a
double flash, when the collar needs to be recharged.
When the “Constant” button on the transmitter is
pushed, the collar indicator light will glow steadily
for as long as you hold the button down, for up to
twelve seconds. When the “Nick” button is pushed,
the light comes on for a fraction of a second.
17
COLLAR
Contact Points
The collar should be fitted so that the
stainless steel contact points press firmly against
the dog’s skin.
A loose fit can allow the collar to move
around on the dog’s neck. When this happens,
the contact points may rub the skin and cause
irritation. If the collar is too loose, electrical
contact will be inconsistent and your corrections
will be inconsistant also.