Bissell 1189E - Manual (Page 7)

To maintain maximum cleaning performance, the
following maintenance steps must be performed.
Emptying the Debris bin
Debris bin should be emptied before debris
reaches the FUll line on the bin
1. Turn power OFF (O) and remove hand vac
from unit as directed in step 1 “Using your hand
vacuum”.
2. Hold the hand vacuum vertically and depress
the release button to release debris bin.
3. Gently pull debris bin away from the body of
the hand vac and remove the filter and separator.
4. empty debris into waste container.
5. Open the clear cap of the cyclonic separator,
wipe away any debris inside, and discard.
6. Replace filter and separator back into debris
bin and attach debris bin to hand vac until it
snaps securely in place.
www.bissell.com
0844.888.6644
7
Maintenance & Care
Release
button
WaRnInG
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
3. 2. 5.