ClearSounds ANS3000 - Manual (Page 9)

9 – ENGLISH
the mounting screws so they are hooked into the
left and right keyhole slots. Slowly slide the unit down
until it snaps into place.
█
Power ON/OFF
In idle mode, press the On/Off key to turn the answering
machine on or off. The current setting will be announced. If
the answering machine is off, the LED shows
“- -“.
█
Voice Prompt Language
There are 3 languages used to play the voice prompt messages:
English, Spanish and French. To set the language:
1. Press and hold the Language key until the current
language is displayed.
2. Press the Language key repeatedly to choose the desired
language. Every time you press this key, the LED shows the
current setting (En, Fr, SP).
3. When the desired language is displayed, press and hold the
Language key and you will hear a confirmation beep.
█
Day Setting
Before each message is played, the day of the week and time
it was received will be announced (time is automatically set
through your Caller ID* service when a message is left and can
not be set up manually). To set the day of the week:
1. Press and hold the Day key until the current setting
is announced.
2. Press the Day key repeatedly and each time you press the
key, the system will announce a day. Keep pressing until
you reach the correct day.
SETTINGS