ClearSounds ANS3000 - Manual (Page 10)

10 – ENGLISH
3. When the correct day is announced, press and hold the Day
key and you will hear a confirmation beep and the day will
be repeated.
Note: If the AC adapter is unplugged, the day will need
to be set again.
* Caller ID Service is a subscription service from your telephone service provider.
█
Ringer (Number of Rings)
This is the number of rings after the answering machine takes
an incoming call and plays your outgoing message. You can
select from 2 to 6 rings or toll saver mode. If you select Toll
Saver , the unit answers after the 3rd ring if there are new
messages waiting or after the 6th ring if there are no new
messages waiting. To set the number of rings:
1. Press and hold the Ringer key until the current number of
rings is displayed.
2. Press the Ringer key repeatedly to choose the desired
number of rings (2-6 rings or Toll Saver). Every time you
press this key, the LED shows the current setting (r2-r6 or
L5, which is Toll Saver).
3. When the desired number of rings is displayed, press and
hold the Ringer key and you will hear a confirmation beep.
█
Outgoing Message (OGM)
The answering machine offers 2 modes for operation. OGM1
will answer and record, which is the conventional outgoing
message that allows the caller to leave a message. OGM2
will answer only, which is the outgoing message that does not
allow a caller to leave a message (this message will be played
when your answering machine is full or you can manually
select this message).
Each OGM can be up to 3 minutes. The answering machine
comes with a pre-recorded message for each OGM. The default